Plotting with Basic Glyphs

Creating Figures

Note that Bokeh plots created using the bokeh.plotting interface come with a default set of tools, and default visual styles. See Styling Visual Attributes for information about how to customize the visual style of plots, and Configuring Plot Tools for information about changing or specifying tools.

Scatter Markers

To scatter circle markers on a plot, use the circle() method of Figure:

from bokeh.plotting import figure, output_file, show

# output to static HTML file
output_file("line.html")

p = figure(plot_width=400, plot_height=400)

# add a circle renderer with a size, color, and alpha
p.circle([1, 2, 3, 4, 5], [6, 7, 2, 4, 5], size=20, color="navy", alpha=0.5)

# show the results
show(p)

Similarly, to scatter square markers, use the square() method of Figure:

from bokeh.plotting import figure, output_file, show

# output to static HTML file
output_file("square.html")

p = figure(plot_width=400, plot_height=400)

# add a square renderer with a size, color, and alpha
p.square([1, 2, 3, 4, 5], [6, 7, 2, 4, 5], size=20, color="olive", alpha=0.5)

# show the results
show(p)

There are lots of marker types available in Bokeh, you can see details and example plots for all of them by clicking on entries in the list below:

All the markers have the same set of properties: x, y, size (in screen units), and angle (radians by default). Additionally, circle() has a radius property that can be used to specify data-space units.

Line Glyphs

Single Lines

Below is an example that shows how to generate a single line glyph from one dimensional sequences of x and y points using the line() glyph method:

from bokeh.plotting import figure, output_file, show

output_file("line.html")

p = figure(plot_width=400, plot_height=400)

# add a line renderer
p.line([1, 2, 3, 4, 5], [6, 7, 2, 4, 5], line_width=2)

show(p)

Step Lines

For some kinds of data, it may be more appropriate to draw discrete steps between data points, instead of connecting points with linear segments. The step() glyph method can be used to accomplish this:

from bokeh.plotting import figure, output_file, show

output_file("line.html")

p = figure(plot_width=400, plot_height=400)

# add a steps renderer
p.step([1, 2, 3, 4, 5], [6, 7, 2, 4, 5], line_width=2, mode="center")

show(p)

Step levels can be drawn before, after, or centered on the x-coordinates, as condfigured by the mode parameter.

Multiple Lines

Sometimes it is useful to plot multiple lines all at once. This can be accomplished with the multi_line() glyph method:

from bokeh.plotting import figure, output_file, show

output_file("patch.html")

p = figure(plot_width=400, plot_height=400)

p.multi_line([[1, 3, 2], [3, 4, 6, 6]], [[2, 1, 4], [4, 7, 8, 5]],
             color=["firebrick", "navy"], alpha=[0.8, 0.3], line_width=4)

show(p)

Note

This glyph is unlike most other glyphs. Instead of accepting a one dimensional list or array of scalar values, it accepts a “list of lists” for x and y positions of each line, parameters xs and ys. multi_line also expects a scalar value or a list of scalers per each line for parameters such as color, alpha, linewidth, etc. Similarily, a ColumnDataSource may be used consisting of a “list of lists” and a lists of scalars where the length of the list of scalars and length of lists must match.

Missing Points

NaN values can be passed to line() and multi_line() glyphs. In this case, you end up with single logical line objects, that have multiple disjoint components when rendered:

from bokeh.plotting import figure, output_file, show

output_file("line.html")

p = figure(plot_width=400, plot_height=400)

# add a line renderer with a NaN
nan = float('nan')
p.line([1, 2, 3, nan, 4, 5], [6, 7, 2, 4, 4, 5], line_width=2)

show(p)

Stacked Lines

In some instances, it is desirable to stack lines that are aligned on a common index (e.g. time series of percentages). The vline_stack() and hline_stack() convenience methods can be used to accomplish this. Note the these methods stack columns from an explicity supplied ColumnDataSource (see the section Providing Data for Plots and Tables for more information

from bokeh.models import ColumnDataSource
from bokeh.plotting import figure, output_file, show

output_file("vline_stack.html")

source = ColumnDataSource(data=dict(
    x=[1, 2, 3, 4, 5],
    y1=[1, 2, 4, 3, 4],
    y2=[1, 4, 2, 2, 3],
))
p = figure(plot_width=400, plot_height=400)

p.vline_stack(['y1', 'y2'], x='x', source=source)

show(p)

Bars and Rectangles

Bars

When drawing rectangular bars (often representing intervals) it is often more convenient to have coordinates that are a hybrid of the two systems above. Bokeh provides the hbar() and vbar() glyphs function for this purpose.

To draw vertical bars by specifying a (center) x-coordinate, width, and top and bottom endpoints, use the vbar() glyph function:

from bokeh.plotting import figure, show, output_file

output_file('vbar.html')

p = figure(plot_width=400, plot_height=400)
p.vbar(x=[1, 2, 3], width=0.5, bottom=0,
       top=[1.2, 2.5, 3.7], color="firebrick")

show(p)

To draw horizontal bars by specifying a (center) y-coordinate, height, and left and right endpoints, use the hbar() glyph function:

from bokeh.plotting import figure, show, output_file

output_file('hbar.html')

p = figure(plot_width=400, plot_height=400)
p.hbar(y=[1, 2, 3], height=0.5, left=0,
       right=[1.2, 2.5, 3.7], color="navy")

show(p)

Stacked Bars

It is often desirable to stack bars. This can be accomplished with the vbar_stack() and hbar_stack() convenience methods. Note the these methods stack columns from an explicity supplied ColumnDataSource (see the section Providing Data for Plots and Tables for more information).

from bokeh.models import ColumnDataSource
from bokeh.plotting import figure, output_file, show

output_file("hbar_stack.html")

source = ColumnDataSource(data=dict(
    y=[1, 2, 3, 4, 5],
    x1=[1, 2, 4, 3, 4],
    x2=[1, 4, 2, 2, 3],
))
p = figure(plot_width=400, plot_height=400)

p.hbar_stack(['x1', 'x2'], y='y', height=0.8, color=("grey", "lightgrey"), source=source)

show(p)

More examples of stacked bars can be found in the section Handling Categorical Data.

Rectangles

To draw axis aligned rectangles (“quads”) by specifying the left, right, top, and bottom positions, use the quad() glyph function:

from bokeh.plotting import figure, show, output_file

output_file('rectangles.html')

p = figure(plot_width=400, plot_height=400)
p.quad(top=[2, 3, 4], bottom=[1, 2, 3], left=[1, 2, 3],
       right=[1.2, 2.5, 3.7], color="#B3DE69")

show(p)

To draw arbitrary rectangles by specifying a center point, width, height, and angle, use the rect() glyph function:

from math import pi
from bokeh.plotting import figure, show, output_file

output_file('rectangles_rotated.html')

p = figure(plot_width=400, plot_height=400)
p.rect(x=[1, 2, 3], y=[1, 2, 3], width=0.2, height=40, color="#CAB2D6",
       angle=pi/3, height_units="screen")

show(p)

Hex Tiles

Bokeh can plot hexagonal tiles, which are often used for showing binned aggregations. The hex_tile() method takes a size parameter to define the size of the hex grid, and axial coordinates to specify which tiles are present.

import numpy as np

from bokeh.io import output_file, show
from bokeh.plotting import figure
from bokeh.util.hex import axial_to_cartesian

output_file("hex_coords.html")

q = np.array([0,  0, 0, -1, -1,  1, 1])
r = np.array([0, -1, 1,  0,  1, -1, 0])

p = figure(plot_width=400, plot_height=400, toolbar_location=None)
p.grid.visible = False

p.hex_tile(q, r, size=1, fill_color=["firebrick"]*3 + ["navy"]*4,
           line_color="white", alpha=0.5)

x, y = axial_to_cartesian(q, r, 1, "pointytop")

p.text(x, y, text=["(%d, %d)" % (q,r) for (q, r) in zip(q, r)],
       text_baseline="middle", text_align="center")

show(p)

A more realistic example below computes counts per bin using the hexbin() function and plots the colormapped counts:

import numpy as np

from bokeh.io import output_file, show
from bokeh.plotting import figure
from bokeh.transform import linear_cmap
from bokeh.util.hex import hexbin

n = 50000
x = np.random.standard_normal(n)
y = np.random.standard_normal(n)

bins = hexbin(x, y, 0.1)

p = figure(tools="wheel_zoom,reset", match_aspect=True, background_fill_color='#440154')
p.grid.visible = False

p.hex_tile(q="q", r="r", size=0.1, line_color=None, source=bins,
           fill_color=linear_cmap('counts', 'Viridis256', 0, max(bins.counts)))

output_file("hex_tile.html")

show(p)

The above code can be made even simpler by calling the hexbin() method of Figure.

Directed Areas

Directed areas are filled regions between two series that share a common index. For instance, a vertical directed area has one x coordinate array, and two y coordinate arrays, y1 and y2, which will be filled between.

Single Areas

A single directed area between two aligned series can be created in the vertical direction with varea() or in the horizontal direction with harea().

from bokeh.plotting import figure, output_file, show

output_file("varea.html")

p = figure(plot_width=400, plot_height=400)

p.varea(x=[1, 2, 3, 4, 5],
        y1=[2, 6, 4, 3, 5],
        y2=[1, 4, 2, 2, 3])

show(p)

Stacked Areas

It is often desirable to stack directed areas. This can be accomplished with the varea_stack() and harea_stack() convenience methods. Note the these methods stack columns from an explicity supplied ColumnDataSource (see the section Providing Data for Plots and Tables for more information.

from bokeh.models import ColumnDataSource
from bokeh.plotting import figure, output_file, show

output_file("varea_stack.html")

source = ColumnDataSource(data=dict(
    x=[1, 2, 3, 4, 5],
    y1=[1, 2, 4, 3, 4],
    y2=[1, 4, 2, 2, 3],
))
p = figure(plot_width=400, plot_height=400)

p.varea_stack(['y1', 'y2'], x='x', color=("grey", "lightgrey"), source=source)

show(p)

Patches and Polygons

Single Patches

Below is an example that shows how to generate a single polygonal patch glyph from one dimensional sequences of x and y points using the patch() glyph method:

from bokeh.plotting import figure, output_file, show

output_file("patch.html")

p = figure(plot_width=400, plot_height=400)

# add a patch renderer with an alpha an line width
p.patch([1, 2, 3, 4, 5], [6, 7, 8, 7, 3], alpha=0.5, line_width=2)

show(p)

Multiple Patches

Sometimes it is useful to plot multiple polygonal patches all at once. This can be accomplished with the patches() glyph method:

from bokeh.plotting import figure, output_file, show

output_file("patch.html")

p = figure(plot_width=400, plot_height=400)

p.patches([[1, 3, 2], [3, 4, 6, 6]], [[2, 1, 4], [4, 7, 8, 5]],
          color=["firebrick", "navy"], alpha=[0.8, 0.3], line_width=2)

show(p)

Note

This glyph is unlike most other glyphs. Instead of accepting a one dimensional list or array of scalar values, it accepts a “list of lists” for x and y positions of each patch, parameters xs and ys. patches also expects a scalar value or a list of scalers per each patch for parameters such as color, alpha, linewidth, etc. Similarily, a ColumnDataSource may be used consisting of a “list of lists” and a lists of scalars where the length of the list of scalars and length of lists must match.

Missing Points

Just as with line() and multi_line(), NaN values can be passed to patch() and patches() glyphs. In this case, you end up with single logical patch objects, that have multiple disjoint components when rendered:

from bokeh.plotting import figure, output_file, show

output_file("patch.html")

p = figure(plot_width=400, plot_height=400)

# add a patch renderer with a NaN value
nan = float('nan')
p.patch([1, 2, 3, nan, 4, 5, 6], [6, 7, 5, nan, 7, 3, 6], alpha=0.5, line_width=2)

show(p)

Warning

Hit testing on patch objects with NaN values is not currently supported.

Polygons with Holes

The multi_polygons() glyph uses nesting to accept a variety of information relevant to polygons. Anything that can be rendered as a patches() can also be rendered as multi_polygons(), but additionally multi_polygons() can render holes inside each polygon.

Note

This glyph is unlike most other glyphs. Instead of accepting a one dimensional list or array of scalar values, it accepts a 3 times nested list of x and y positions for the exterior and holes composing each polygon. MultiPolygons also expects a scalar value or a list of scalers per each item for parameters such as color, alpha, linewidth, etc. Similarily, one can use a ColumnDataSource consisting of a 3 times nested list and a list of scalars where the length of the list of scalars and length of the top level list must match.

Simple Polygon

Below is an example that shows how to generate a single polygon glyph from 3 times nested one-dimensional sequences of x and y points using the multi_polygons() glyph method:

from bokeh.plotting import figure, show, output_file

output_file('multipolygon_simple.html')

p = figure(plot_width=400, plot_height=400)
p.multi_polygons(xs=[[[[1, 1, 2, 2]]]],
                 ys=[[[[3, 4, 4, 3]]]])

show(p)

Polygon with Holes

Below is an example that shows how to generate a single polygon with holes from three sequences of x and y points. The first sequence represents the exterior of the polygon and the following sequences represent the holes:

from bokeh.plotting import figure, show, output_file

output_file('multipolygon_with_holes.html')

p = figure(plot_width=400, plot_height=400)
p.multi_polygons(xs=[[[ [1, 2, 2, 1], [1.2, 1.6, 1.6], [1.8, 1.8, 1.6] ]]],
                 ys=[[[ [3, 3, 4, 4], [3.2, 3.6, 3.2], [3.4, 3.8, 3.8] ]]])

show(p)

MultiPolygon with Separate Parts

Sometimes one conceptual polygon is composed of multiple polygon geometries. Below is an example that shows how to generate a MultiPolygon glyph from several sequences of x and y points. Each item in the sequence represents a part of the MultiPolygon:

from bokeh.plotting import figure, show, output_file

output_file('multipolygon_with_separate_parts.html')

p = figure(plot_width=400, plot_height=400)
p.multi_polygons(xs=[[[ [1, 1, 2, 2], [1.2, 1.6, 1.6], [1.8, 1.8, 1.6] ], [ [3, 4, 3] ]]],
                 ys=[[[ [4, 3, 3, 4], [3.2, 3.2, 3.6], [3.4, 3.8, 3.8] ], [ [1, 1, 3] ]]])

show(p)

Multiple MultiPolygons

The top level of nesting is used to separate each MultiPolygon from the others. Each MultiPolygon can be thought of as a row in the data source - potentially with a corresponding label or color.

from bokeh.plotting import figure, show, output_file

output_file('multipolygons.html')

p = figure(plot_width=400, plot_height=400)
p.multi_polygons(
    xs=[
        [[ [1, 1, 2, 2], [1.2, 1.6, 1.6], [1.8, 1.8, 1.6] ], [ [3, 3, 4] ]],
        [[ [1, 2, 2, 1], [1.3, 1.3, 1.7, 1.7] ]]],
    ys=[
        [[ [4, 3, 3, 4], [3.2, 3.2, 3.6], [3.4, 3.8, 3.8] ], [ [1, 3, 1] ]],
        [[ [1, 1, 2, 2], [1.3, 1.7, 1.7, 1.3] ]]],
    color=['blue', 'red'])

show(p)

Ovals and Ellipses

The oval() glyph method accepts the same properties as rect(), but renders oval shapes:

from math import pi
from bokeh.plotting import figure, show, output_file

output_file('ovals.html')

p = figure(plot_width=400, plot_height=400)
p.oval(x=[1, 2, 3], y=[1, 2, 3], width=0.2, height=40, color="#CAB2D6",
       angle=pi/3, height_units="screen")

show(p)

The ellipse() glyph accepts the same properties as oval() and rect() but renders ellipse shapes, which are different from oval ones. In particular, the same value for width and height will render a circle using the ellipse() glyph but not the oval() one:

from math import pi
from bokeh.plotting import figure, show, output_file

output_file('ellipses.html')

p = figure(plot_width=400, plot_height=400)
p.ellipse(x=[1, 2, 3], y=[1, 2, 3], width=[0.2, 0.3, 0.1], height=0.3,
          angle=pi/3, color="#CAB2D6")

show(p)

Images

You can display images on Bokeh plots using the image(), image_rgba(), and image_url() glyph methods.

The first example here shows how to display images in Bokeh plots from raw RGBA data using image_rgba():

Note

This example depends on the open source NumPy library in order to more easily generate an array of RGBA data.

from __future__ import division

import numpy as np

from bokeh.plotting import figure, output_file, show

# create an array of RGBA data
N = 20
img = np.empty((N, N), dtype=np.uint32)
view = img.view(dtype=np.uint8).reshape((N, N, 4))
for i in range(N):
    for j in range(N):
        view[i, j, 0] = int(255 * i / N)
        view[i, j, 1] = 158
        view[i, j, 2] = int(255 * j / N)
        view[i, j, 3] = 255

output_file("image_rgba.html")

p = figure(plot_width=400, plot_height=400, x_range=(0, 10), y_range=(0, 10))

p.image_rgba(image=[img], x=[0], y=[0], dw=[10], dh=[10])

show(p)

The hover tool allows interactive inspection of the values specified at any chosen pixel. For more information on how to enable hover with images, please consult the hover tool section of the tools user guide.

Segments and Rays

Sometimes it is useful to be able to draw many individual line segments at once. Bokeh provides the segment() and ray() glyph methods to render these.

The segment() function accepts start points x0, y0 and end points x1 and y1 and renders segments between these:

from bokeh.plotting import figure, show

p = figure(plot_width=400, plot_height=400)
p.segment(x0=[1, 2, 3], y0=[1, 2, 3], x1=[1.2, 2.4, 3.1],
          y1=[1.2, 2.5, 3.7], color="#F4A582", line_width=3)

show(p)

The ray() function accepts start points x, y with a length (in screen units) and an angle. The default angle_units are "rad" but can also be changed to "deg". To have an “infinite” ray, that always extends to the edge of the plot, specify 0 for the length:

from bokeh.plotting import figure, show

p = figure(plot_width=400, plot_height=400)
p.ray(x=[1, 2, 3], y=[1, 2, 3], length=45, angle=[30, 45, 60],
      angle_units="deg", color="#FB8072", line_width=2)

show(p)

Wedges and Arcs

To draw a simple line arc, Bokeh provides the arc() glyph method, which accepts radius, start_angle, and end_angle to determine position. Additionally, the direction property determines whether to render clockwise ("clock") or anti-clockwise ("anticlock") between the start and end angles.

from bokeh.plotting import figure, show

p = figure(plot_width=400, plot_height=400)
p.arc(x=[1, 2, 3], y=[1, 2, 3], radius=0.1, start_angle=0.4, end_angle=4.8, color="navy")

show(p)

The wedge() glyph method accepts the same properties as arc(), but renders a filled wedge instead:

from bokeh.plotting import figure, show

p = figure(plot_width=400, plot_height=400)
p.wedge(x=[1, 2, 3], y=[1, 2, 3], radius=0.2, start_angle=0.4, end_angle=4.8,
        color="firebrick", alpha=0.6, direction="clock")

show(p)

The annular_wedge() glyph method is similar to arc(), but draws a filled area. It accepts a inner_radius and outer_radius instead of just radius:

from bokeh.plotting import figure, show

p = figure(plot_width=400, plot_height=400)
p.annular_wedge(x=[1, 2, 3], y=[1, 2, 3], inner_radius=0.1, outer_radius=0.25,
                start_angle=0.4, end_angle=4.8, color="green", alpha=0.6)

show(p)

Finally, the annulus() glyph methods, which accepts inner_radius and outer_radius, can be used to draw filled rings:

from bokeh.plotting import figure, show

p = figure(plot_width=400, plot_height=400)
p.annulus(x=[1, 2, 3], y=[1, 2, 3], inner_radius=0.1, outer_radius=0.25,
          color="orange", alpha=0.6)

show(p)

Specialized Curves

Bokeh also provides quadratic() and bezier() glyph methods for drawing parameterized quadratic and cubic curves. These are somewhat uncommon; please refer to the reference documentation for details.

Combining Multiple Glyphs

Combining multiple glyphs on a single plot is a matter of calling more than one glyph method on a single Figure:

from bokeh.plotting import figure, output_file, show

x = [1, 2, 3, 4, 5]
y = [6, 7, 8, 7, 3]

output_file("multiple.html")

p = figure(plot_width=400, plot_height=400)

# add both a line and circles on the same plot
p.line(x, y, line_width=2)
p.circle(x, y, fill_color="white", size=8)

show(p)

This principle holds in general for all the glyph methods in bokeh.plotting. Any number of glyphs may be added to a Bokeh plot.

Setting Ranges

By default, Bokeh will attempt to automatically set the data bounds of plots to fit snugly around the data. Sometimes you may need to set a plot’s range explicitly. This can be accomplished by setting the x_range or y_range properties using a Range1d object that gives the start and end points of the range you want:

p.x_range = Range1d(0, 100)

As a convenience, the figure() function can also accept tuples of (start, end) as values for the x_range or y_range parameters. Below is a an example that shows both methods of setting the range:

from bokeh.plotting import figure, output_file, show
from bokeh.models import Range1d

output_file("title.html")

# create a new plot with a range set with a tuple
p = figure(plot_width=400, plot_height=400, x_range=(0, 20))

# set a range using a Range1d
p.y_range = Range1d(0, 15)

p.circle([1, 2, 3, 4, 5], [2, 5, 8, 2, 7], size=10)

show(p)

Ranges also have a bounds property that allows you to specify limits of the plot that you do not want the user to be able to pan/zoom beyond.

# set a range using a Range1d
p.y_range = Range1d(0, 15, bounds=(0, None))

Specifying Axis Types

All the examples above use the default linear axis. This axis is suitable for many plots that need to show numerical data on a linear scale. In other cases you may have categorical data, or need to display numerical data on a datetime or log scale. This section shows how to specify the axis type when using bokeh.plotting interface.

Categorical Axes

Categorical axes are created by specifying a FactorRange for one of the plot ranges (or a lists of factors to be converted to one). Below is a simple example, for complete details see Handling Categorical Data.

from bokeh.plotting import figure, output_file, show

factors = ["a", "b", "c", "d", "e", "f", "g", "h"]
x = [50, 40, 65, 10, 25, 37, 80, 60]

output_file("categorical.html")

p = figure(y_range=factors)

p.circle(x, factors, size=15, fill_color="orange", line_color="green", line_width=3)

show(p)

Datetime Axes

When dealing with timeseries data, or any data that involves dates or times, it is desirable to have an axis that can display labels that are appropriate to different date and time scales.

Note

This example requires a network connection, and depends on the open source Pandas library in order to more easily present realistic timeseries data.

We have seen how to use the figure() function to create plots using the bokeh.plotting interface. This function accepts x_axis_type and y_axis_type as arguments. To specify a datetime axis, pass "datetime" for the value of either of these parameters.

import pandas as pd
from bokeh.plotting import figure, output_file, show
from bokeh.sampledata.stocks import AAPL

df = pd.DataFrame(AAPL)
df['date'] = pd.to_datetime(df['date'])

output_file("datetime.html")

# create a new plot with a datetime axis type
p = figure(plot_width=800, plot_height=250, x_axis_type="datetime")

p.line(df['date'], df['close'], color='navy', alpha=0.5)

show(p)

Note

Future versions of Bokeh will attempt to auto-detect situations when datetime axes are appropriate, and add them automatically by default.

Log Scale Axes

When dealing with data that grows exponentially or is of many orders of magnitude, it is often necessary to have one axis on a log scale. Another scenario involves plotting data that has a power law relationship, when it is desirable to use log scales on both axes.

As we saw above, the figure() function accepts x_axis_type and y_axis_type as arguments. To specify a log axis, pass "log" for the value of either of these parameters.

By default, log axis ranges are calculated to fit around positive valued data. To set your own ranges, see the section on Setting Ranges.

from bokeh.plotting import figure, output_file, show

x = [0.1, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0]
y = [10**xx for xx in x]

output_file("log.html")

# create a new plot with a log axis type
p = figure(plot_width=400, plot_height=400, y_axis_type="log")

p.line(x, y, line_width=2)
p.circle(x, y, fill_color="white", size=8)

show(p)

Twin Axes

It is possible to add multiple axes representing different ranges to a single plot. To do this, configure the plot with “extra” named ranges in the extra_x_range and extra_y_range properties. Then these named ranges can be referred to when adding new glyph methods, and also to add new axes objects using the add_layout method on Plot. An example is given below:

from numpy import pi, arange, sin, linspace

from bokeh.plotting import output_file, figure, show
from bokeh.models import LinearAxis, Range1d

x = arange(-2*pi, 2*pi, 0.1)
y = sin(x)
y2 = linspace(0, 100, len(y))

output_file("twin_axis.html")

p = figure(x_range=(-6.5, 6.5), y_range=(-1.1, 1.1))

p.circle(x, y, color="red")

p.extra_y_ranges = {"foo": Range1d(start=0, end=100)}
p.circle(x, y2, color="blue", y_range_name="foo")
p.add_layout(LinearAxis(y_range_name="foo"), 'left')

show(p)

Adding Annotations

The section on adding annotations to plots has moved. Please see Adding Annotations